CONDITIONS & INSTRUCTIONS for WARRANTY REGISTRATION

1. Please note that proof of purchase is required to be presented at the time of claiming a warranty for all goods whether registered or not.
2. Please check the warranty conditions for each product written in the manuals or information sheets supplied with each item as warranty conditions change for different manufacturers and products.
3. The white warranty card for the Aqualung regulators must be filled in, stamped by the Authorised Aqualung dealer and kept by the end user. This card is to be given to the Authorised Aqualung Service Centre when the regulators are presented for the annual service. An entry is to be made on the card for each annual service and stamped by the authorised dealer. This information is then used to supply the free annual service kits for Aqualung Regulators only, provided all conditions are met.
4. Please enter any serial number noted for your product as follows. The serial numbers are usually on the packaging or box as you can find serial numbers for most computers on the back casing of the computer. Cameras, strobes and housing have serial numbers on the outside of the casing, under the clear section of the casing or inside the casing. BCD's usually have the serial number under the flap which holds the inflator just below the shoulder valve. Regulators have the serial number etched into the body of the first stage and the second stage casing.